NL500 industrial sectional doors for your company
industrial doors are reliable doors, made of the highest quality materials, ensuring comfort and safety of use.
We offer gates with various types of guides for use in almost every type of building, from production halls, warehouses, to fire stations, car workshops and many other facilities.
Each of our garage doors is equipped with a standard protection against the effects of breaking torsion springs. In addition, our gates can be equipped with wicket doors that allow you to enter the facility without opening the gate; muntin sections filled with acrylic glass, illuminating the interior of your investment or muntin sections filled with a panel of aluminum sheet filled with foam; ventilation grids enabling free air exchange inside the building.
industrial Doors Normal driving NL500
For an industrial door with normal guiding, the required minimum lintel height is 510 mm and minimum 100 mm of the reveal width (on the drive side + 150 mm) and the installation depth of at least the door opening height + 675 mm.
Product characteristics: shaft and torsion springs mounted on the lintel, in front of the double horizontal tracks.
Hn: min. 510 mm
b: min. 100 mm (drive side + 150 mm)
W: min. H + 675 mm
industrial Doors CE-LHR 240 low guidance
The required lintel height of an industrial door with a low track is a minimum of 240 mm. The reveal width is at least 120 mm (drive side + 150 mm) and the installation depth is at least equal to the door clear height + 820 mm.
Product characteristics: shaft and torsion springs mounted on the back of the double horizontal rails.
Hn: min. 240 mm
b: min. 120 mm (drive side + 150 mm)
W: min. H + 820 mm
industrial Doors Elevated HL driving
The industrial door with elevated rail is available for two elevation values: HL = 1500 mm and HL = 2500 mm. The required minimum lintel height is HL + 305 mm (1500) / HL + 360 (2500), the reveal width is at least 100 mm (on the drive side + 150 mm), the installation depth is at least equal to the height – HL + 1000 mm.
Product characteristics: shaft and torsion springs mounted on the lintel, in front of the individual horizontal guides.
HL: max. 1500 mm / max. 2500 mm
Hn: HL + 305mm (1500) / HL + 360mm (2500)
b: min. 100 mm (drive side + 150 mm)
W: min. (H-HL) + 1000 mm
industrial Doors High Operation on HL100K Consoles
Industrial gates of high operation on consoles are available in two values of elevation: HL = 1,500 mm and HL = 2,500 mm. The required height of the header is 1,500 mm, the minimum width of the jamb is 500 mm (+ 150 mm at the driving side), built-in depth must be at least equal to the height – HL + 1,000 mm.
Product characteristics: shaft and torsion springs installed on consoles, in front of single horizontal guides.
HL: max. 1500 mm / max. 2500 mm
Hn: min. 1500 mm
b: min. 500 mm (+ 150 mm at the driving side)
W: min. (H-HL) + 1000 mm
industrial Doors Bevel Operation FTR
Industrial gates of bevel operation require a header of minimum height of 510 mm and a jamb of minimum width of 100 mm (+ 150 mm at the driving side), as well as built-in depth at least equal to the height of the gate opening + 900 mm.
Product characteristics: shaft and torsion springs installed on a header, in front of single horizontal guides.
Hn: 510 mm
b: min. 100 mm (+ 150 mm at the driving side)
W: min. H + 900 mm
industrial roller doors
roller grilles
